Energy efficiency could prevent the need to build up to 50 power plants in Indonesia

Energy efficiency could prevent the need to build up to 50 power plants in Indonesia
Saving energy can save money and the environment. Credit: Mohamed Hassan/ Pixabay

Indonesia's electricity demand is growing rapidly. Robust economic growth combined with unprecedented urbanisation and industrialisation are driving this demand.

Based on the Ministry of Energy and Mineral Resources statisctics, daily peak demand is also increasing rapidly. It is officially projected to double by 2030 to over 160 gigawatts (GW).

Domestic appliances and equipment, such as air conditioners (ACs), lighting, refrigerators and TVs, will lead demand in Indonesia by 2030, representing as much as 70% of the load during peak time at 8pm.

To meet the rising demand, Indonesia plans to build 87GW of additional power – the equivalent of 175 medium-size (500 megawatt) power plants—by 2030.

However, our research identifies strategies to cut electricity consumption by 25GW by 2030, equal to 35% of the peak electricity consumption in that year. The adoption of efficient technologies would reduce electricity use in lamps, air conditioners, refrigerators and other appliances.

With these technologies, Indonesia can avoid building 50 of the planned power plants by 2030.

Efficient technologies to reduce load

Our model forecasts by appliance types and analyses different scenarios of technology adoption to understand their impacts on future electricity loads.

We found the efficient technologies provide the same service to the households (lighting, cooling, etc) but use less energy. This makes them as much as 50% less expensive for consumers to run.

For example, common technologies are LEDs (light-emitting diodes), which produce more light with less heat loss, inverter ACs, which allow the AC to work at variable speed, and increased refrigerator insulation, which will keep food compartments cold longer.

While some Indonesians have already chosen to buy efficient technologies, tens of millions of energy-consuming products are entering households for the first time in the coming years.

Therefore, it is important to have strong policies in place to eliminate inefficient products and promote efficient ones in the market.

In particular, with sales of growing at 7.5% every year in Indonesia, we find over half of the potential savings could come from this product alone.

Further research by our team has shown efficient cooling technologies using an inverter drive are available in Indonesia at a cost not necessarily higher than the inefficient ones.

In terms of climate impacts, we found efficient appliances and lighting could achieve nearly 27% of the energy sector emission-reduction target. That's 84.5 million tons of CO₂ saved by 2030. This makes it an essential tool in reducing carbon emissions (decarbonisation) of Indonesia's , along with deployment of renewable energy.

The ministry has introduced the national sectoral targets for energy conservation into the National Elecricity Master Plan, or RUKN, to reduce energy consumption for the first time in 2019.

The plan stipulates that 37GW of the projected 166GW peak demand in 2030 can be avoided through energy conservation for the next ten years.

Energy conservation relies on energy-efficient technologies (this is what our research focuses on) as well as changes in consumer behaviours (such as turning off the light when you leave a room).

Recommendations

As grows in Indonesia at the same time as the country pursues clean energy, energy efficiency is a critical tool for financial viability and energy security.

Energy efficiency means using less energy to perform the same task. Technologies now offer us the benefits of energy efficiency. Energy-efficiency policies support the deployment of these technologies.

We recommend that Indonesia consider energy efficiency as a resource for meeting the country's future energy needs.

Even with low coal prices, is the cheapest way to provide electricity to the Indonesian people.

Typically, we have found the cost of saving a unit of electricity (kWh) is around 2-3 cents, compared to the typical household electricity rate of 10-11 cents/kWh in Indonesia.

Energy efficiency will also help with the integration of renewable energy (like solar PV) by reducing the evening peak demand and the need for energy storage systems or expensive plants that are run only for high demand, such as gas-fired "peaker" plants.

Because of the shape of the load—high peak demand at 8pm—the system will need additional capacity that baseload cannot meet, i.e. coal.

We recommend the Ministry of Energy and Mineral Resources turn to the 37GW target to help the country meet its climate commitments of 29% unconditional emission reduction by 2030.

We hope our research can help prioritise policy action and track progress towards the country's clean energy and climate goals.

Implementing these targets will help save the government money, reduce local and global pollution, and ultimately will reduce costs for Indonesian consumers.

Provided by The Conversation

This article is republished from The Conversation under a Creative Commons license. Read the original article.The Conversation

Citation: Energy efficiency could prevent the need to build up to 50 power plants in Indonesia (2020, April 24) retrieved 29 March 2024 from https://techxplore.com/news/2020-04-energy-efficiency-power-indonesia.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Geothermal energy storage system to reduce peak electricity demand

9 shares

Feedback to editors