Capturing water to make the renewable fuels of the future

fuel
Credit: CC0 Public Domain

A successful outcome for the energy transition is very much dependent on the development of alternative fuel solutions that are ultra-clean, renewable, and low in carbon emissions. Fuels that must be replaced include liquefied petroleum gas (LPG) and diesel, which are fuels frequently used in vehicles and in heating. A promising replacement fuel is dimethyl ether (DME). Unlike current fossil fuels, DME leads to low emissions and it can be produced renewably. However, current DME production processes are limited when it comes to producing renewable DME from biomass or CO2, particularly due to problems handling steam in the process. For his Ph.D. research, Jasper van Kampen developed a new process for producing DME, and he defends his thesis on June 4th at the department of Chemical Engineering and Chemistry.

Central to the is the provision of clean, renewable, and low-carbons fuels. One candidate is dimethyl ether (DME), a colorless gas that is easy to liquefy and transport. Although DME is traditionally made from natural gas, it can be renewably produced from CO2 and H2. Crucially, it's similar in properties to liquefied (LPG), which means that DME could be used in existing LPG infrastructure. As a fuel, it could be used to replace diesel in compression ignition engines or used in a blend with LPG in spark ignition engines.

Renewable issues

Normally, DME is made from synthesis gas (a mixture of CO and H2), which is obtained from , with CO2 being the main by-product. Using a renewable source such as previously emitted CO2 or CO2-rich biobased materials seems like a better approach, but current processes only make small amounts of DME. In addition, H2 for the production of DME can be made from steam, but there are issues with the efficient handling of steam.

For his Ph.D. research, Jasper van Kampen explored how to improve the production of renewable DME through the capturing of steam using zeolitic material, which is a mineral that can trap certain molecules. He implemented this in an approach known as sorption enhanced DME synthesis (SEDMES). Critically, he investigated and validated the technology under test conditions relevant for industry.

Removing steam with a sponge

Fundamentally, SEDMES is a novel way of making DME. It is based on the removal of water by a solid adsorbent that acts as a sponge to take up water. Removing water in this way ensures that no CO2 is produced as it would be in conventional DME production methods. Instead, previously-emitted CO2 along with the captured water can then be converted into renewable DME.

During his work on the project, van Kampen addressed several important aspects including materials, adsorption processes, catalysis and reactor engineering, and advanced modelling. His research has led to a dynamic reactor model that allows for upscaling of the SEDMES technology and predictions for large-scale DME synthesis. Importantly, the significant advancements made with the technology in this research can play an important role in the energy transition, where fossil-based fuels and chemicals have to be replaced by products from renewable feedstocks.

More information: Efficient carbon utilization to dimethyl ether by steam adsorption enhancement. research.tue.nl/nl/publication … r-by-steam-adsorptio

Citation: Capturing water to make the renewable fuels of the future (2021, June 7) retrieved 29 March 2024 from https://techxplore.com/news/2021-06-capturing-renewable-fuels-future.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Algal biodiesel could be the best eco-friendly fuel option of tomorrow

5 shares

Feedback to editors