Sodium nitrate passivation as a novel insulation technology for soft magnetic composites

Sodium nitrate passivation as a novel insulation technology for soft magnetic composites
The insulation coating exhibits bi-layered structure containing an oxide barrier and a hydroxide precipitation layer. The growth and the dissolution rate of the coating vary with the pH value of the NaNO3 passivation solution, resulting in different coating thickness, which is correlated to the magnetic performance of the corresponding soft magnetic composites. Credit: Prof. Mi Yan

Soft magnetic composites, which are fabricated based on metallic magnetic powders via insulation coating, binding, compaction, and annealing, serve as the key fundamental material in various fields including energy, transportation, aerospace, and national defense. Due to the low-electrical-resistivity nature of the soft magnetic alloys, it is challenging to control the eddy current loss, which has become a bottle-neck problem for high-frequency applications.

For scientific research and , phosphorization technology is usually used to generate coatings. However, the resultant phosphate tends to decompose above 600 C and lose the insulation effect at elevated temperatures. It is of great significance to develop new insulation technology to form coating with strong adhesion, together with satisfactory thermal stability and electrical resistivity for high-frequency applications of soft magnetic composites.

Recently, Engineering published research work on sodium nitrate passivation as a novel insulation technology for soft magnetic composites developed by Prof. Mi Yan and Dr. Chen Wu's team.

In this work, Prof. Yan and Dr. Wu's team has proposed sodium nitrate passivation as a novel insulation technology for soft magnetic composites. Evolutions of the coating under different pH conditions have been revealed based on systematic compositional and microstructural investigations, with the growth mechanisms of the coatings unveiled through kinetic and thermodynamic analyses.

The study shows that the insulation coating obtained using an acidic NaNO3 passivation solution with pH = 2 consists of Fe2O3, SiO2, Al2O3, and AlO(OH). Large growth rate of the coating layer resulted due to the strong oxidation capability of NO3 under , while the dissolution rate of the passivation layer is also high because of the large H+ concentration, giving rise to small thickness of the passive layer at pH = 2.

With an increased pH of 5, the Fe2O3 converts into Fe3O4 with weakened oxidation capability of NO3. Despite the slightly decreased growth rate of the passivation layer, the reduction of H+ concentration also greatly inhibits its dissolution, resulting in a maximum thickness of the insulation coating for significantly enhanced and optimum alternating current (AC) magnetic performance (μe = 97.2, Pcv = 296.4 mW/cm3 under 50 kHz and 100 mT).

Further raising the pH to 8 significantly weakens the oxidability of the NO3, resulting in only Al2O3, AlO(OH), and SiO2 in the passivation layer with slow growth and significantly reduced thickness. In addition, corrosion occurs in some regions of the magnetic powder surface, leading to deteriorated performance.

The NaNO3 technology developed in this work is not only extendable to other magnetic alloy systems but also lays a solid foundation for the development of novel and advanced insulation coatings that use oxidizing agents such as nitrite, superoxide, and permanganate.

More information: Mi Yan et al, Sodium Nitrate Passivation as a Novel Insulation Technology for Soft Magnetic Composites, Engineering (2022). DOI: 10.1016/j.eng.2022.01.016

Provided by Engineering
Citation: Sodium nitrate passivation as a novel insulation technology for soft magnetic composites (2022, November 25) retrieved 28 March 2024 from https://techxplore.com/news/2022-11-sodium-nitrate-passivation-insulation-technology.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Researchers investigate new mixture material used for quarter-wave plate laser beam splitter

9 shares

Feedback to editors