Researchers create 3-D-printed, sweating robot muscle

Researchers create 3-D-printed, sweating robot muscle
A Cornell team led by Rob Shepherd, associate professor of mechanical and aerospace engineering, made a 3D-printed hand with hydraulically controlled fingers that can cool itself by sweating. Credit: Cornell University

Just when it seemed like robots couldn't get any cooler, Cornell researchers have created a soft robot muscle that can regulate its temperature through sweating.

This form of thermal management is a basic building block for enabling untethered, high-powered robots to operate for long periods of time without overheating, according to the Rob Shepherd, associate professor of mechanical and aerospace engineering, who led the project.

The team's paper, "Autonomic Perspiration in 3-D Printed Hydrogel Actuators," published Jan. 29 in Science Robotics.

One of the hurdles for making enduring, adaptable and agile robots is managing the robots' , according to Shepherd, the paper's senior author. If the high-torque density motors and exothermic engines that power a overheat, the robot will cease to operate.

This is a particular issue for soft robots, which are made of . While more flexible, they hold their heat, unlike metals, which dissipate heat quickly. An internal cooling technology, such as a fan, may not be much help because it would take up space inside the robot and add weight.

So Shepherd's team took inspiration from the natural cooling system that exists in mammals: sweating.

Video of the sweaty robotic hand gripping and lowering the temperature of different hot objects. Credit: Mishra et al., Sci Robot. 5, eaaz3918 (2020)

"The ability to perspire is one of the most remarkable features of humans," said co-lead author T.J. Wallin, M.S. '16, Ph.D. '18, a research scientist at Facebook Reality Labs. "Sweating takes advantage of evaporated to rapidly dissipate heat and can cool below the ambient environmental . … So as is often the case, biology provided an excellent guide for us as engineers."

Shepherd's team partnered with the lab of Emmanuel Giannelis, the Walter R. Read Professor of Engineering, to create the necessary nanopolymer materials for sweating via a 3-D-printing technique called multi-material stereolithography, which uses light to cure resin into predesigned shapes.

"Our contribution is the making of mixtures of nanoparticles and polymeric materials that basically allow us to control the viscosity, or flow, of these fluids," said Giannelis, also Cornell's vice provost for research and vice president for technology transfer, intellectual property and research policy.

The researchers fabricated fingerlike actuators composed of two hydrogel materials that can retain water and respond to temperature—in effect, "smart" sponges. The base layer, made of poly-N-isopropylacrylamide, reacts to temperatures above 30 C (86 F) by shrinking, which squeezes water up into a top layer of polyacrylamide that is perforated with micron-sized pores. These pores are sensitive to the same temperature range and automatically dilate to release the "sweat," then close when the temperature drops below 30 C.

Video of the soft actuators sweating. Credit: Mishra et al., Sci Robot. 5, eaaz3918 (2020)

The evaporation of this water reduces the actuator's surface temperature by 21 C within 30 seconds, a cooling process that is approximately three times more efficient than in humans, the researchers found. The actuators are able to cool off roughly six times faster when exposed to wind from a fan.

"The best part of this synthetic strategy is that the thermal regulatory performance is based in the material itself," said Wallin. "We did not need to have sensors or other components to control the sweating rate. When the local temperature rose above the transition, the pores would simply open and close on their own."

Video of the 3D printing technique multimaterial stereolithography. Credit: Mishra et al., Sci Robot. 5, eaaz3918 (2020)

The team incorporated the actuator fingers into a robot hand that could grab and lift objects, and they realized that autonomous sweating not only cooled the hand, but lowered the temperature of the object as well. While the lubrication could make a robot hand slippery, Shepherd says that modifications to the hydrogel texture could compensate by improving the hand's grip, much like wrinkles in skin.

One disadvantage of the technology is that it can hinder a robot's mobility. There is also a need for the robots to replenish their water supply, which has led Shepherd to envision soft robots that will someday not only perspire like mammals, but drink like them, too.

Researchers create 3-D-printed, sweating robot muscle
The bending angles of the hydrogel actuator, powered by air pressure. Credit: Mishra et al., Sci Robot. 5, eaaz3918 (2020)

The ability of a robot to secrete fluids could also lead to methods for absorbing nutrients, catalyzing reactions, removing contaminants and coating the robot's surface with a protective layer, the researchers wrote.

"I think that the future of making these more biologically analogous materials and robots is going to rely on the material composition," Shepherd said. "This brings up a point [about the importance of] multidisciplinary research in this area, where really no one group has all the answers."

Other contributors included postdoctoral associate and co-lead author Anand Mishra; postdoctoral associate Wenyang Pan; doctoral student Patricia Xu; and Barbara Mazzolai of the Italian Institute of Technology's Center for Micro-BioRobotics.


Explore further

These new soft actuators could make soft robots less bulky

More information: Anand K. Mishra et al, Autonomic perspiration in 3D-printed hydrogel actuators, Science Robotics (2020). DOI: 10.1126/scirobotics.aaz3918
Journal information: Science Robotics

Provided by Cornell University
Citation: Researchers create 3-D-printed, sweating robot muscle (2020, January 30) retrieved 6 April 2020 from https://techxplore.com/news/2020-01-d-printed-robot-muscle.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
185 shares

Feedback to editors

User comments