Microstructure morphology fine-tuning of active layer film boosts organic solar cell efficiency

Microstructure morphology fine-tuning of active layer film boosts organic solar cell efficiency
Graphical abstract. Credit: Joule (2021). DOI: 10.1016/j.joule.2021.06.017

The power conversion efficiency (PCE) of organic solar cells (OSCs) are demonstrated to be improved via the microstructure morphology fine-tuning of active layer films. Thanks to the appealing advantages like light weight, mechanical flexibility and roll-to-roll processability, OSCs have drawn increasing attention. As a promising power source for flexible electronic systems, they feature relatively high PCE, which still needs to be improved.

Small molecular donor guests play an active role in developing OSCs based on the ternary strategy, which is an effective approach to optimize photovoltaic performance.

In a study published in Joule, a group led by Prof. Ge Ziyi at the Ningbo Institute of Materials Technology and Engineering of the Chinese Academy of Sciences designed and synthesized two small molecular donors with similar chemical structures, G17 and G19, which differ in molecular stacking order. G17 exhibits an amorphous orientation, while the G19 features an extremely ordered edge-on orientation.

The researchers employed the ternary strategy by introducing the third component G17 and G19 into the D18-Cl:Y6 binary systems respectively to fine-tune the microstructure morphology and light absorption of the films.

The non-fullerene rigid (OSCs) developed based on G19, the relatively ordered small molecular donor G19, achieved a superior (PCE) of 18.5%, which are even among the best performance for rigid OSCs reported to date. Correspondingly, the G17-based rigid OSCs only showed a relatively low PCE of 17.13%.

The excellent photovoltaic performances of D18-Cl:G19:Y6 based rigid OSCs can be attributed to the highly ordered molecular stacking of the guest, which enhance phase separation and carrier transport.

In addition, the researchers obtained a stabilized PCE of 15.9% for flexible OSCs, which was the highest PCE reported for flexible state-of-the-art OSCs. Most importantly, the ternary flexible OSCs exhibited excellent mechanical stability as they could retain about 93% of the original PCE after 1000 bending cycles.

This study made breakthroughs in both rigid and flexible OSCs, and shed light on the construction of efficient ternary systems with incorporating highly ordered molecular donors.


Explore further

Over 14% efficiency for ternary organic solar cell with 300 nm thick active layer

More information: Zhenyu Chen et al, Small-molecular donor guest achieves rigid 18.5% and flexible 15.9% efficiency organic photovoltaic via fine-tuning microstructure morphology, Joule (2021). DOI: 10.1016/j.joule.2021.06.017
Journal information: Joule

Citation: Microstructure morphology fine-tuning of active layer film boosts organic solar cell efficiency (2021, July 22) retrieved 21 September 2021 from https://techxplore.com/news/2021-07-microstructure-morphology-fine-tuning-layer-boosts.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
8 shares

Feedback to editors