Superconducting hardware could scale up brain-inspired computing

Superconducting hardware could scale up brain-inspired computing
Artistic rendering of how superconducting circuits that mimic synapses (connections between neurons in the brain) might be used to create artificial optoelectronic neurons of the future. Credit: J. Chiles and J. Shainline/NIST

Scientists have long looked to the brain as an inspiration for designing computing systems. Some researchers have recently gone even further by making computer hardware with a brain-like structure. These "neuromorphic chips" have already shown great promise, but they have used conventional digital electronics, limiting their complexity and speed. As the chips become larger and more complex, the signals between their individual components become backed up like cars on a gridlocked highway and reduce computation to a crawl.

Now, a team at the National Institute of Standards and Technology (NIST) has demonstrated a solution to these communication challenges that may someday allow artificial neural systems to operate 100,000 times faster than the human brain.

The human brain is a network of about 86 billion cells called neurons, each of which can have thousands of connections (known as synapses) with its neighbors. The neurons communicate with each other using short electrical pulses called spikes to create rich, time-varying activity patterns that form the basis of cognition. In neuromorphic chips, electronic components act as artificial neurons, routing spiking signals through a brain-like network.

Doing away with conventional electronic communication infrastructure, researchers have designed networks with tiny light sources at each neuron that broadcast optical signals to thousands of connections. This scheme can be especially energy-efficient if superconducting devices are used to detect single particles of light known as photons—the smallest possible optical signal that could be used to represent a spike.

Superconducting hardware could scale up brain-inspired computing
Photograph of a NIST superconducting circuit that behaves like an artificial version of a synapse, a connection between nerve cells (neurons) in the brain. The labels show various components of the circuit and their functions. Credit: S. Khan and B. Primavera/NIST

In a new Nature Electronics paper, NIST researchers have achieved for the first time a circuit that behaves much like a biological synapse yet uses just single photons to transmit and receive signals. Such a feat is possible using superconducting single-photon detectors. The computation in the NIST circuit occurs where a single-photon detector meets a superconducting circuit element called a Josephson junction.

A Josephson junction is a sandwich of superconducting materials separated by a thin insulating film. If the current through the sandwich exceeds a certain threshold value, the Josephson junction begins to produce small voltage pulses called fluxons. Upon detecting a photon, the single-photon detector pushes the Josephson junction over this threshold and fluxons are accumulated as current in a superconducting loop. Researchers can tune the amount of current added to the loop per photon by applying a bias (an external current source powering the circuits) to one of the junctions. This is called the synaptic weight.

This behavior is similar to that of biological synapses. The stored current serves as a form of short-term memory, as it provides a record of how many times the neuron produced a spike in the near past. The duration of this memory is set by the time it takes for the electric current to decay in the superconducting loops, which the NIST team demonstrated can vary from hundreds of nanoseconds to milliseconds, and likely beyond.

This means the hardware could be matched to problems occurring at many different time scales—from high-speed industrial control systems to more leisurely conversations with humans. The ability to set different weights by changing the bias to the Josephson junctions permits a longer-term memory that can be used to make the networks programmable so that the same network could solve many different problems.

Synapses are a crucial computational component of the brain, so this demonstration of superconducting single-photon synapses is an important milestone on the path to realizing the team's full vision of superconducting optoelectronic networks. Yet the pursuit is far from complete. The team's next milestone will be to combine these synapses with on-chip sources of light to demonstrate full superconducting optoelectronic neurons.

"We could use what we've demonstrated here to solve computational problems, but the scale would be limited," NIST project leader Jeff Shainline said. "Our next goal is to combine this advance in superconducting electronics with semiconductor light sources. That will allow us to achieve communication between many more elements and solve large, consequential problems."

The team has already demonstrated light sources that could be used in a full system, but further work is required to integrate all the components on a single chip. The synapses themselves could be improved by using detector materials that operate at higher temperatures than the present system, and the team is also exploring techniques to implement synaptic weighting in larger-scale neuromorphic chips.

More information: Saeed Khan et al, Superconducting optoelectronic single-photon synapses, Nature Electronics (2022). DOI: 10.1038/s41928-022-00840-9
Journal information: Nature Electronics

Citation: Superconducting hardware could scale up brain-inspired computing (2022, October 6) retrieved 30 November 2022 from https://techxplore.com/news/2022-10-superconducting-hardware-scale-brain-inspired.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Combining light, superconductors could boost AI capabilities

213 shares

Feedback to editors