Extending the life of low-cost, compact, lightweight batteries

Extending the life of low-cost, compact, lightweight batteries
Photo of Al-air prototype used to collect data in the study. Credit: Brandon J. Hopkins

Metal-air batteries are one of the lightest and most compact types of batteries available, but they can have a major limitation: When not in use, they degrade quickly, as corrosion eats away at their metal electrodes. Now, MIT researchers have found a way to substantially reduce that corrosion, making it possible for such batteries to have much longer shelf lives.

While typical only lose about 5 percent of their charge after a month of storage, they are too costly, bulky, or heavy for many applications. Primary (nonrechargeable) batteries are much less expensive and more compact and lightweight, but they can lose 80 percent of their charge a month.

The MIT design overcomes the problem of corrosion in aluminum-air batteries by introducing an oil barrier between the aluminum electrode and the electrolyte—the fluid between the two electrodes that eats away at the aluminum when the battery is on standby. The oil is rapidly pumped away and replaced with electrolyte as soon as the battery is used. As a result, the energy loss is cut to just 0.02 percent a month—more than a thousandfold improvement.

The findings are reported today in the journal Science by former MIT graduate student Brandon J. Hopkins '18, W.M. Keck Professor of Energy Yang Shao-Horn, and professor of mechanical engineering Douglas P. Hart.

While several other methods have been used to extend the shelf life of metal-air batteries (which can use other metals such as sodium, lithium, magnesium, zinc, or iron), these methods can sacrifice performance Hopkins says. Most of the other approaches involve replacing the electrolyte with a different, less corrosive chemical formulation, but these alternatives drastically reduce the battery power.

Other methods involve pumping the liquid electrolyte out during storage and back in before use. These methods still enable significant corrosion and can clog plumbing systems in the battery pack. Because aluminum is hydrophilic (water-attracting) even after electrolyte is drained out of the pack, the remaining electrolyte will cling to the aluminum electrode surfaces. "The batteries have complex structures, so there are many corners for electrolyte to get caught in," which results in continued corrosion, Hopkins explains.

Video showing the underwater-oleophobic properties of the aluminum electrode. Credit: Brandon J. Hopkins

A key to the new system is a thin membrane placed between the . When the battery is in use, both sides of the membrane are filled with a , but when the battery is put on standby, oil is pumped into the side closest to the aluminum electrode, which protects the aluminum surface from the electrolyte on the other side of the membrane.

The new battery system also takes advantage of a property of aluminum called "underwater oleophobicity"—that is, when aluminum is immersed in water, it repels oil from its surface. As a result, when the battery is reactivated and electrolyte is pumped back in, the easily displaces the oil from the aluminum surface, which restores the power capabilities of the battery. Ironically, the MIT method of corrosion suppression exploits the same property of aluminum that promotes corrosion in conventional systems.

The result is an aluminum-air prototype with a much longer shelf life than that of conventional aluminum-air batteries. The researchers showed that when the battery was repeatedly used and then put on standby for one to two days, the MIT design lasted 24 days, while the conventional design lasted for only three. Even when oil and a pumping system are included in scaled-up primary aluminum-air battery packs, they are still five times lighter and twice as compact as rechargeable lithium-ion battery packs for electric vehicles, the researchers report.

Hart explains that aluminum, besides being very inexpensive, is one of the "highest chemical energy-density storage materials we know of"—that is, it is able to store and deliver more energy per pound than almost anything else, with only bromines, which are expensive and hazardous, being comparable. He says many experts think aluminum-air batteries may be the only viable replacement for lithium-ion batteries and for gasoline in cars.

Aluminum-air batteries have been used as range extenders for electric vehicles to supplement built-in rechargeable batteries, to add many extra miles of driving when the built-in battery runs out. They are also sometimes used as power sources in remote locations or for some underwater vehicles. But while such batteries can be stored for long periods as long as they are unused, as soon as they are turned on for the first time, they start to degrade rapidly.

Such applications could greatly benefit from this new system, Hart explains, because with the existing versions, "you can't really shut it off. You can flush it and delay the process, but you can't really shut it off." However, if the new system were used, for example, as a range extender in a car, "you could use it and then pull into your driveway and park it for a month, and then come back and still expect it to have a usable battery. ... I really think this is a game-changer in terms of the use of these batteries."

With the greater that could be afforded by this new system, the use of -air batteries could "extend beyond current niche applications," says Hopkins. The team has already filed for patents on the process.

Explore further

A novel catalyst for high-energy aluminum-air flow batteries

More information: B.J. Hopkins el al., "Suppressing corrosion in primary aluminum–air batteries via oil displacement," Science (2018). science.sciencemag.org/cgi/doi … 1126/science.aat9149
Journal information: Science

Citation: Extending the life of low-cost, compact, lightweight batteries (2018, November 8) retrieved 25 May 2019 from https://techxplore.com/news/2018-11-life-low-cost-compact-lightweight-batteries.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Feedback to editors

User comments

Nov 08, 2018
I find this concept fascinating. Obviously, placing a battery like this on standby takes a few minutes. And restoring it for use also has a lag time built in. But the mechanics of using a car in which the car is usually shut down between uses makes such a mechanism quite viable.

Particularly considering the incredibly high power to weight ratio of aluminum air batteries.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more