Pinpointing the sound of rock failure

Pinpointing the sound of failure
Supervised machine learning found that negative turning (black points) and positive turning (white points) amplitude measurements across a neutral zero line (grey points) happened in concert with rock fracture moments. Credit: Rui Liu, Texas A&M Engineering

If a rock deep in the subsurface cracks and fails under pressure and temperature change, can the sound it makes be heard and identified? Finding the specific sound a rock makes when it cracks and breaks seems impossible when surrounded by other subsurface noises.

But Texas A&M University researcher Dr. Siddharth Misra, the Ted H. Smith, Jr. '75 and Max R. Vordenbaum '73 DVG Associate Professor in the Harold Vance Department of Petroleum Engineering, discovered a way to hear and validate that .

"The DOE calls sounds of specific events the 'signs of signature,'" said Misra. "In this case, the signature identified the break or mechanical discontinuity of a rock in the earth's subsurface, especially as the breaks continued to grow or propagate into fractures."

Misra and his doctoral candidate Rui Liu published their preliminary findings in the May 2022 issue of the Systems and Signals Processing journal.

Why does Basic Energy Sciences want this signature identified? Sounds are often important clues to environmental and security changes. Threatening noises, such as underground explosions, are hard to mistake. But the small sounds of a high-rise building foundation cracking and failing are just as threatening. So, the fundamental sound of rock undergoing is a basic and critical clue worth finding.

"This research goes to the heart of identifying something specific within a massive data set," said Misra. "An example is credit card transactions. You cannot monitor the whole data set for fraud because the transactions are so varied. You must find some indicative sign, such as a credit card charge in one city to book an airline flight immediately after that same card pays for an Uber in another city. That discrepancy is a signature."

Previous attempts to pinpoint underground mechanical failures never brought reliable success, but Misra found that an unusual combination of three research methods—supervised machine learning, causal discovery and rapid simulations—could tackle the problem.

Pinpointing the sound of rock failure
Graduate researcher Rui Liu is working with her mentor, Dr. Siddharth Misra, on a project that has identified and confirmed the definitive sound signature a rock makes as it cracks and continues to fracture. Credit: Nancy Luedke, Texas A&M Engineering

The supervised machine learning began with lab experiments in which a multipoint sensor system was placed on the surface of a rock and recorded sound wave-transmission measurements through the material as it cracked and finally failed. Computers monitored the information and were taught which data signatures meant initial, intermediate and end-stage damage. One tell-tale signature that repeatedly traveled up and down across the zero point between positive and negative measurements caught the computer's attention, once it knew what to look for.

"I can only see the color or shape of something with my eyes," said Liu. "But machine learning can pick out so many more characteristics from the data. It picked out those positive and negative turnings, and we used that sign to get further results."

Misra and Liu searched for the causation of each of these turnings to confirm their source. They couldn't rely on the computer to complete this step because machine learning is not the best interpreter.

"During the heat of the summer, ice cream sales increase and drowning deaths increase," said Misra. "If you use or simple statistical methods, they might say people are drowning because people eat ice cream. That's a . Though they are both related to the summer heat, they are not connected to each other. They each have a different cause. We are looking for causation for these turnings because that's when they become meaningful."

Misra and Liu created a workflow that could generate scenarios of various fracture propagations and measured waveforms. Then, they increased the workflow's speed to rapidly run up to 20,000 different simulations of possibilities for each event. This allowed the researchers to discover the best cause-and-effect explanations.

"We didn't control how the discontinuity propagated, so there's a lot of randomness," said Misra. "Yet, as the grew, despite the differences in direction or length, results showed a similar increase in amplifications or positive and negative turnings across the zero point in the waveforms. So, this is a definite signature of rock failure, which, to the best of my knowledge, was not known prior to this research."

While the signature discovery is exciting, the project still has several months to go. Misra intends to explore the limits of the data-driven simulations and causal discovery approach. He will also test other methods to see if similar or different results occur.

"What we need to do as scientists, as engineers, is to find causality, find causation," said Misra. "We tried a lot of different techniques to discover this signature and its causal relationships. A lot of approaches didn't work, but one did. Now we need to find the limits of what it can do."

More information: Rui Liu et al, Monitoring the propagation of mechanical discontinuity using data-driven causal discovery and supervised learning, Mechanical Systems and Signal Processing (2022). DOI: 10.1016/j.ymssp.2021.108791

Citation: Pinpointing the sound of rock failure (2022, March 30) retrieved 29 March 2024 from https://techxplore.com/news/2022-03-failure.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Underground noise reveals fracture pathways needed for energy production

64 shares

Feedback to editors