New breathable gas sensors may improve monitoring of health, environment

New breathable gas sensors may improve monitoring of health, environment
Credit: Li Yang et al, ACS Applied Materials & Interfaces (2022). DOI: 10.1021/acsami.2c02061

Newly developed flexible, porous and highly sensitive nitrogen dioxide sensors that can be applied to skin and clothing have potential applications in health care, environmental health monitoring and military use, according to researchers.

Led by Huanyu "Larry" Cheng, assistant professor of engineering science and mechanics at Penn State, the researchers published their sensor designs (which build on previous models) and results in ACS Applied Materials and Interfaces.

The sensors monitor nitrogen dioxide, either from breath if attached under the nose, or from perspiration, if attached elsewhere on the body. Unlike taking , the direct skin attachment allows for continuous, long-term monitoring of the gas.

Cheng explained that while similar sensors exist, a key differentiator of the new design is breathability.

"The commonly used substrate materials for gas sensors are flexible, but not porous," he said. "The accumulation of water moisture from the can potentially lead to irritation or damage to the skin surface. We need to make sure the device can be porous so that moisture can go through the sensor without accumulation on the surface."

The researchers created the new sensors using a fabrication method known as laser direct writing.

"Laser direct writing is similar to additive manufacturing in that it is easy to set up and low cost, and the laser is widely available," Cheng said. "The process is relatively robust, rapid and could be scaled up to large-scale manufacturing production."

Cheng and his team integrated a type of material known as with resin to laser write sensors with the desired breathability.

"Block copolymer integration goes beyond the materials we have been using, so we explored extending the substrate material from the typical thin film to virtually anything," Cheng said. "That can give us breathability and tunability of the pore size."

Cheng said that the sensor could monitor conditions such as , which nitrogen dioxide can cause or make worse. He also noted that while the sensors were developed specifically to detect , they could potentially detect a variety of gases and biomarkers—to determine to monitor diabetes, for example, or to identify hazards in industrial or combat settings.

"The sensors can also be useful for monitoring gas in the environment," he said. "We could monitor air quality and inform patients of potential concerns about too much exhaust from cars, for example. Then, they could use that information to avoid certain areas on certain days."

Other authors on this paper are Li Yang, Huadong Ji, Chuizhou Meng, Guanhao Zheng, Xue Chen, Guangyu Niu, Jiayi Yan, Ye Xue and Shijie Guo, all of Hebei University of Technology in Tianjin, China; and Yuhang Li of Beihang University in Beijing.

More information: Li Yang et al, Intrinsically Breathable and Flexible NO2 Gas Sensors Produced by Laser Direct Writing of Self-Assembled Block Copolymers, ACS Applied Materials & Interfaces (2022). DOI: 10.1021/acsami.2c02061

Citation: New breathable gas sensors may improve monitoring of health, environment (2022, May 20) retrieved 19 April 2024 from
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Researchers develop sensors that detect human biomarkers and toxic gas


Feedback to editors