Built to last: Perovskite solar cells tough enough to match mighty silicon

Built to last: The perovskite solar cells tough enough to match mighty silicon
Solar cells created using the new mechanism displaying less degradation under long term exposure to heat and light. Credit: Oxford University

Researchers at Oxford University and Exciton Science have demonstrated a new way to create stable perovskite solar cells, with fewer defects and the potential to finally rival silicon's durability.

By removing the solvent dimethyl-sulfoxide and introducing dimethylammonium chloride as a crystallization agent, the researchers were able to better control the intermediate phases of the perovskite crystallization process, leading to thin films of greater quality, with reduced defects and enhanced stability.

Large groups of up to 138 sample devices were then subjected to a rigorous accelerated aging and testing process at high temperatures and in real-world conditions.

Formamidinium-cesium perovskite created using the new synthesis process significantly outperformed the and demonstrated resistance to thermal, humidity and light degradation.

This is a strong step forward to matching commercial silicon's stability and makes perovskite-silicon tandem devices a much more realistic candidate for becoming the dominant next-generation solar cell.

Led by Professor Henry Snaith (Oxford University) and Professor Udo Bach (Monash University), the work has been published in the journal Nature Materials.

Built to last: The perovskite solar cells tough enough to match mighty silicon
Sebastian Fürer and Philippe Holzhey working at Monash University. Credit: Exciton Science

Oxford University Ph.D. student Philippe Holzhey, a Marie Curie Early Stage Researcher and joint first author on the work, said, "It's really important that people start shifting to realize there is no value in performance if it's not a stable performance.

"If the device lasts for a day or a week or something, there's not so much value in it. It has to last for years."

During testing, the best device operated above the T80 threshold for over 1,400 hours under simulated sunlight at 65°C. T80 is the time it takes for a solar cell to reduce to 80% of its initial efficiency, a common benchmark within the research field.

Beyond 1,600 hours, the control device fabricated using the conventional dimethyl-sulfoxide approach stopped functioning, while devices fabricated with the new, improved design retained 70% of their original efficiency, under accelerated aging conditions.

The same degradation study was performed on a group of devices at the very high temperature of 85°C, with the new cells again outperforming the control group.

Extrapolating from the data, the researchers calculated that the new cells age by a factor of 1.7 for each 10°C increase in the temperature they are exposed to, which is close to the 2-fold increase expected of commercial silicon devices.

Built to last: The perovskite solar cells tough enough to match mighty silicon
David McMeekin working with a nitrogen glovebox in the Clarendon Laboratory at Oxford University. Credit: Oxford University

Dr. David McMeekin, the corresponding and joint first author on the paper, was an Australian Center for Advanced Photovoltaics (ACAP) Postdoctoral Fellow at Monash University and is now a Marie Skłodowska-Curie Postdoctoral Fellow at Oxford University.

He said, "I think what separates us from other studies is that we've done a lot of accelerated aging. We've aged the cells at 65°C and 85°C under the whole light spectrum."

The number of devices used in the study is also significant, with many other perovskite research projects limited to just one or two prototypes.

"Most studies only show one curve without any standard deviation or any kind of statistical approach to determine if this design is more stable than the other," David added.

The researchers hope their work will encourage a greater focus on the intermediate phase of perovskite crystallization as an important factor in achieving greater stability and commercial viability.

Built to last: The perovskite solar cells tough enough to match mighty silicon
Philippe Holzhey working at Monash University. Credit: Exciton Science

Background: About perovskites

Artificially synthesized in laboratory conditions, semiconductor thin films made up of perovskite compounds are far cheaper to make than silicon solar cells, with greater flexibility and a tunable band gap.

They emerged unexpectedly in the last decade and have reached impressive power-conversion efficiencies of over 25%.

However, too much focus has been placed on creating the most efficient solar cell, rather than resolving the fundamental problems inhibiting the material from being used in widespread commercial applications.

Compared to silicon, perovskites can degrade rapidly in real world conditions, with exposure to heat and moisture causing damage and negatively impacting device performance.

Solving these stability issues is the key challenge for perovskites in their quest to take on, or "boost" silicon via a tandem architecture and take their place in the commercial photovoltaics landscape.

More information: David P. McMeekin et al, Intermediate-phase engineering via dimethylammonium cation additive for stable perovskite solar cells, Nature Materials (2022). DOI: 10.1038/s41563-022-01399-8

Journal information: Nature Materials
Provided by ARC Centre of Excellence in Exciton Science
Citation: Built to last: Perovskite solar cells tough enough to match mighty silicon (2022, December 7) retrieved 19 March 2024 from https://techxplore.com/news/2022-12-built-perovskite-solar-cells-tough.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Sulfonium cations for quasi-2D perovskite solar cells

140 shares

Feedback to editors