This article has been reviewed according to Science X's editorial process and policies. Editors have highlighted the following attributes while ensuring the content's credibility:

fact-checked

peer-reviewed publication

trusted source

proofread

New quantum material promises up to 190% quantum efficiency in solar cells

New quantum material promises over 190% quantum efficiency in solar cells
Schematic of the thin-film solar cell with CuxGeSe/SnS as the active layer. Credit: Ekuma Lab / Lehigh University

Researchers from Lehigh University have developed a material that demonstrates the potential for drastically increasing the efficiency of solar panels.

A prototype using the material as the active layer in a solar cell exhibits an average photovoltaic absorption of 80%, a high generation rate of photoexcited carriers, and an (EQE) up to an unprecedented 190%—a measure that far exceeds the theoretical Shockley-Queisser efficiency limit for silicon-based materials and pushes the field of quantum materials for photovoltaics to new heights.

"This work represents a significant leap forward in our understanding and development of sustainable energy solutions, highlighting innovative approaches that could redefine solar energy efficiency and accessibility in the near future," said Chinedu Ekuma, professor of physics, who published a paper on the development of the material with Lehigh doctoral student Srihari Kastuar in the journal Science Advances.

The material's efficiency leap is attributable largely to its distinctive "intermediate band states," specific that are positioned within the material's electronic structure in a way that makes them ideal for solar energy conversion.

These states have energy levels within the optimal subband gaps—energy ranges where the material can efficiently absorb sunlight and produce charge carriers—of around 0.78 and 1.26 electron volts.

In addition, the material performs especially well with high levels of absorption in the infrared and visible regions of the electromagnetic spectrum.

In traditional solar cells, the maximum EQE is 100%, representing the generation and collection of one electron for each photon absorbed from sunlight. However, some and configurations developed over the past several years have demonstrated the capability of generating and collecting more than one electron from high-energy photons, representing an EQE of over 100%.

While such multiple exciton generation (MEG) materials are yet to be broadly commercialized, they hold the potential to greatly increase the efficiency of solar power systems. In the Lehigh-developed material, the intermediate band states enable the capture of photon energy that is lost by traditional solar cells, including through reflection and the production of heat.

The researchers developed the by taking advantage of "van der Waals gaps," atomically small gaps between layered two-dimensional materials. These gaps can confine molecules or ions, and materials scientists commonly use them to insert, or "intercalate," other elements to tune material properties.

To develop their novel material, the Lehigh researchers inserted atoms of zerovalent copper between layers of a two-dimensional material made of germanium selenide (GeSe) and tin sulfide (SnS).

Ekuma, an expert in computational condensed matter physics, developed the prototype as a proof of concept after extensive computer modeling of the system demonstrated theoretical promise.

"Its rapid response and enhanced efficiency strongly indicate the potential of Cu-intercalated GeSe/SnS as a quantum material for use in advanced photovoltaic applications, offering an avenue for efficiency improvements in solar energy conversion," he said. "It's a promising candidate for the development of next-generation, high-efficient solar cells, which will play a crucial role in addressing global energy needs."

Although integrating the newly designed quantum material into current solar energy systems will need further research and development, Ekuma points out that the experimental technique used to create these materials is already highly advanced. Scientists have, over time, mastered a method that precisely inserts atoms, ions, and molecules into materials.

More information: Srihari Kastuar et al, Chemically Tuned Intermediate Band States in Atomically Thin CuxGeSe/SnS Quantum Material for Photovoltaic Applications, Science Advances (2024). DOI: 10.1126/sciadv.adl6752. www.science.org/doi/10.1126/sciadv.adl6752

Journal information: Science Advances
Provided by Lehigh University
Citation: New quantum material promises up to 190% quantum efficiency in solar cells (2024, April 10) retrieved 27 May 2024 from https://techxplore.com/news/2024-04-quantum-material-efficiency-solar-cells.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Researchers build selenium–silicon tandem solar cell that could improve efficiency to 40%

179 shares

Feedback to editors