Just like toothpaste: Fluoride radically improves the stability of perovskite solar cells

Just like toothpaste: fluoride radically improves the stability of perovskite solar cells
The atomic structure of fluoride (NaF) containing metal halide perovskite (FAPbI3). Due to its high eletronegativity, fluoride stabilizes the perovskite lattice by forming strong hydrogen bonds and ionic bonds on the surface of the material. Credit: Eindhoven University of Technology

Solar cells made of perovskite hold much promise for the future of solar energy. The material is cheap, easy to produce and almost as efficient as silicon, the material traditionally used in solar cells. However, perovskite degrades quickly, severely limiting its efficiency and stability over time. Researchers from Eindhoven University of Technology, energy research institute DIFFER, Peking University and University of Twente have discovered that adding a small amount of fluoride to the perovskite leaves a protective layer, increasing stability of the materials and the solar cells significantly. The solar cells retain 90 percent of their efficiency after 1000 hours operation at various extreme testing conditions. The findings are published today in the leading scientific journal Nature Energy.

Because they are so cheap to make, perovskite solar cells have been at the center of much recent solar research. As a consequence, their efficiency has risen from less than 4 percent in 2009 to over 24 percent at present, which is close to traditional silicon cells. So-called tandem cells, which combine silicon and perovskite cells, achieve an efficiency of more than 28 percent.

Despite this success, perovskite has a number of defects due to the nature of the material and the way it is manufactured. Over time, vacancies in the atomic structure of the metal halide trigger the degradation of the perovskite under the influence of moisture, light and heat.

Protective layer

The researchers in Eindhoven, Twente and Beijing have experimented with a new type of perovskite, by adding a small amount of in the production process. Just like fluoride in toothpaste, the fluoride ions form a around the crystal, preventing the diffusion of the harmful defects.

"Our work has improved the stability of considerably," says Shuxia Tao, assistant professor at the Center for Computational Energy Research, a joint center of the Department of Applied Physics of TU/e and DIFFER, and co-author of the paper. "Our cells maintain 90 percent of their efficiency after 1000 hours under extreme light and heat conditions. This is many times as long as traditional perovskite compounds. We achieve an efficiency of 21.3 percent, which is a very good starting point for further efficiency gains."

Due to its high eletronegativity, fluoride stabilizes the perovskite lattice by forming strong hydrogen bonds and ionic bonds on the surface of the material.

Much of the work of the team from Eindhoven has gone into explaining why fluoride is such an effective ingredient compared to other halogens. Using they conclude that part of its success is due to the and high electronegativity of fluoride ions. The higher the electronegativity of an element, the easier it attracts electrons of neighbouring elements. This helps fluoride ions to form strong bonds with the other elements in the perovskite compound, forming a stable protective layer.

Future research

The study is seen as an important step towards the successful implementation of perovskite in the future. However, much work remains to be done. The gold standard in the solar industry is a retention rate of at least 85 percent of original efficiency after ten to fifteen years, a standard which is still some way off for cells.

"We expect it will take another five to ten years for these cells to become a commercially viable product. Not only do we need to further improve their and stability, we also need to gain a better theoretical understanding of the relevant mechanisms at the atomic scale. We still don't have all the answers to why some materials are more effective than others in increasing the long-term stability of these ," says Tao.


Explore further

Adding guanidinium thiocyanate to mixed tin-lead perovskites to improve solar cell efficiency

More information: Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells, Nature Energy (2019). DOI: 10.1038/s41560-019-0382-6 , https://www.nature.com/articles/s41560-019-0382-6
Journal information: Nature Energy

Citation: Just like toothpaste: Fluoride radically improves the stability of perovskite solar cells (2019, May 14) retrieved 16 July 2019 from https://techxplore.com/news/2019-05-toothpaste-fluoride-radically-stability-perovskite.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
503 shares

Feedback to editors

User comments

May 14, 2019
Just like toothpaste? Jesus, it literally has nothing to do with toothpaste. Fluoride is already found in several other aspects of solar devices too, like TCO and anti-reflective coatings. Interesting paper, garbage article.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more