September 24, 2019
Engineers study icing/de-icing of wind turbine blades to improve winter power production
In Hui Hu's Iowa State University office, you can feel exactly what ice does to an airfoil.
As he recently rolled through the slides describing his research using Iowa State University's icing wind tunnel, Hu picked up 3-D printouts of icy airplane wings, wind turbine blades and power cables. Where there were supposed to be smooth leading edges and curved and cambered surfaces engineered to create lift or spin with the wind, there were warts of bumpy and coarse ice building up just off the leading edges and trailing over the tops and bottoms of the airfoils.
He even had models of different kinds of ice: The really bumpy stuff is glaze ice (formed under relatively warm and wet conditions, such as freezing rain); the smaller, finer bumps are rime ice (formed under relatively cold and dry conditions from airborne, supercooled water droplets).
"This kind of quantitative information was not available before," said Hu, the Martin C. Jischke Professor in Aerospace Engineering at Iowa State. "We've learned that very small surface modifications with ice-phobic coatings can change icing physics dramatically."
In his latest project, Hu will take an even closer look at ice formation on wind turbine blades—and how to prevent or delay ice from forming. That study could make a difference on Iowans' utility bills.
A three-year, $303,587 grant from the Iowa Energy Center will support the project. Hu's study team includes Linyue Gao, a postdoctoral research associate at the University of Minnesota and former Iowa State doctoral student; plus Haiyang Hu and Ramsankar Veerakumar, doctoral students in aerospace engineering at Iowa State.
It's just the kind of project Hu had in mind when he started the Aircraft Icing Physics and Anti-/De-icing Technology Laboratory at Iowa State seven years ago.
The centerpiece of the lab is Iowa State's Icing Research Tunnel. The wind tunnel can produce temperatures down to -13 Fahrenheit and airflow speeds up to 100 meters per second. The airflow carries water droplets from 10 to 100 millionths of a meter in diameter. A recent upgrade will allow researchers to produce ice crystals to study how they, for example, could create icing problems as they impact hot turbine blades in jet engines.
A high-speed digital image projection system and infrared-thermal imaging cameras capture every detail of ice formation on airfoils—where it forms, how it flows, how it affects the leading edge, how it decreases lift and increases drag. The icing wind tunnel also helps Hu's group test water-repelling coatings that could mitigate ice formation—some of the coatings are based on the spiky surface structure of lotus leaves and others on the wet, oily surface of pitcher plants.
Lab conditions, of course, do not always reflect conditions in the field. And so, when Hu couldn't get permission to measure ice on Iowa wind turbines, he used connections in his native China that allowed a student to take drone footage of icy turbines along a mountain ridge.
The images and resulting measurements helped quantify how icing on turbine blades reduces power production.
"Iowa winters are supposed to be the best season for wind energy harvesting due to the abundant wind resources and increased air density with decreasing temperature," Hu and his research group wrote in a description of their project. "However, ice accretion on turbine blades was found to decrease a turbine's power production significantly (i.e. up to 50% reduction at critical icing sites)."
Current technology takes some of the power produced by turbines to heat the massive surface of turbine blades. But that consumes a lot of energy.
Hu's group will study a hybrid anti-/de-icing strategy: Minimized heating only at small, critical parts of the blades such as leading edges and applying durable, ice-phobic coatings along the rest of the blades.
Good test results could increase power production and lower costs.
"While Iowa ratepayers usually pay higher electricity bills in winter," the researchers wrote, "this project will lead to a novel anti-/de-icing strategy to improve power production of Iowa wind turbines in winter, thus lowering the electricity bills of Iowa ratepayers."