Engineers produce water-saving crop irrigation sensor

Engineers produce water-saving crop irrigation sensor
The soil moisture sensor engineered at UConn is more cost effective than anything currently available and responds to the global need to regulate water consumption in agriculture. Credit: UConn Engineering

A team of University of Connecticut researchers engineered a soil moisture sensor that is more cost effective than anything currently available and responds to the global need to regulate water consumption in agriculture.

Designed and tested on the university's farm, the sensors are small enough to insert into the soil with ease and less expensive to manufacture than current technology, the researchers write in the Journal of Sensors and Actuators.

"Advances in hydrological science are hampered by the lack of on site data," said Guiling Wang, study author and professor of civil and environmental engineering at UConn. "It's really hard to monitor and measure things underground. The challenge is that the existing sensors are very expensive and the installation process is very labor intensive."

The sensors developed by the team of UConn engineers—environmental, mechanical, and chemical—are expected to save nearly 35% of and cost far less than what exists. Current sensors that are used in a similar way range from $100 to $1,000 each, while the one developed at UConn cost $2, according to the researchers.

An alternate monitoring option, soil moisture data collected from remote sensing technology such as radars and radiometers on board satellites, have suffered from low resolution. But the new technology developed by UConn Professor Baikun Li's group can provide high spatio-temporal resolution data needed for hydrology model development in Wang's group.

In the UConn prototype, wires are connected from the sensors to an instrument that logs data. Researchers conducted field tests of the sensors—performing side-by-side tests with commercial sensors under various environmental conditions throughout a 10-month period. The effects of the environmental variations on soil moisture throughout the period were clearly reflected.

Critically, the small sensors can also be easily sent around he world given the fact that soil moisture plays a fundamental role in agricultural decision-making globally.

Accurate sensing is essential to ensure a water level that produces the most robust crops while not wasting the natural resource. In some states in the U.S.—Florida and California, for example—irrigation water usage has become tightly restricted.

The UConn researchers are also working on a nitrogen sensor that is the same model of the sensors. These would help provide farmers with information on when fields need fertilizing. Currently, nitrogen are not available using this type of technology.

"This is really an exciting start to a much larger scope of things we have in mind," says Li, a study author and professor of civil and .


Explore further

New micro water sensor can aid growers

More information: Wangchi Zhou et al, Towards water-saving irrigation methodology: Field test of soil moisture profiling using flat thin mm-sized soil moisture sensors (MSMSs), Sensors and Actuators B: Chemical (2019). DOI: 10.1016/j.snb.2019.126857
Citation: Engineers produce water-saving crop irrigation sensor (2019, September 26) retrieved 12 November 2019 from https://techxplore.com/news/2019-09-water-saving-crop-irrigation-sensor.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
13 shares

Feedback to editors

User comments