Molecular robots that work cooperatively in swarms

Molecular robots work cooperatively in swarms
Schematic illustrations of cargo transport by a swarm of molecular robots (top) and fluorescence images of a molecular robot transporting blue sphere-like cargo (bottom). The scale bar is 20 micrometers. By specifying the position of the light irradiation, it is possible to accumulate the cargo at the designated destination (right). The scale bar is 50 micrometers. Credit: Mousumi Akter, et al

In a global first, scientists have demonstrated that molecular robots are able to accomplish cargo delivery by employing a strategy of swarming, achieving a transport efficiency five times greater than that of single robots.

Swarm robotics is a new discipline, inspired by the cooperative behavior of living organisms, that focuses on the fabrication of robots and their utilization in to accomplish complex tasks. A swarm is an orderly collective behavior of multiple individuals. Macro-scale swarm robots have been developed and employed for a variety of applications, such as transporting and accumulating cargo, forming shapes, and building complex structures.

A team of researchers, led by Dr. Mousumi Akter and Associate Professor Akira Kakugo from the Faculty of Science at Hokkaido University, has succeeded in developing the world's first working micro-sized machines utilizing the advantages of swarming. The findings were published in the journal Science Robotics. The team included Assistant Professor Daisuke Inoue, Kyushu University; Professor Henry Hess, Columbia University; Professor Hiroyuki Asanuma, Nagoya University; and Professor Akinori Kuzuya, Kansai University.

A swarm of cooperating robots gains a number of characteristics which are not found in individual robots—they can divide a workload, respond to risks, and even create complex structures in response to changes in the environment. Microrobots and machines at the micro- and nano-scale have very few practical applications due to their size; if they could cooperate in swarms, their potential uses would increase massively.

Different diameters of cargo loading and transport by single (top) and swarm (bottom) transporters. Scale bar: 20 µm. The diameter of the cargo (d) is mentioned on the top left of each movie. Here, the swarms could load and transport cargoes with diameters up to 20.0 µm, whereas the single transporters failed to load and transport cargoes with a diameter larger than 3.4 µm. The movie is played at 100 times the speed of the original (Mousumi Akter, et al. Science Robotics. April 20, 2022). Credit: Mousumi Akter, et al. Science Robotics. April 20, 2022

The team constructed about five million single molecular machines. These machines were composed of two biological components: microtubules linked to DNA, which allowed them to swarm; and kinesin, which were actuators capable of transporting the microtubules. The DNA was combined with a light-sensitive compound called azobenzene that functioned as a sensor, allowing for control of swarming. When exposed to visible light, changes in the structure of azobenzene caused the DNA to form double strands and led to the microtubules forming swarms. Exposure to UV light reversed this process.

Cooperative task achievement by swarm transporters through loading and transporting cargo over a long distance. Scale bar: 20 µm. Here, the swarm-loaded cargo traveled a total distance of 1 mm without falling off under VIS irradiation. The movie is played at 100 times the speed of the original (Mousumi Akter, et al. Science Robotics. April 20, 2022). Credit: Mousumi Akter, et al. Science Robotics. April 20, 2022

The cargo used in the experiments consisted of polystyrene beads of diameters ranging from micrometers to tens of micrometers. These beads were treated with azobenzene-linked DNA; thus, the cargo was loaded when exposed to visible light and unloaded when exposed to UV light. However, the DNA and azobenzene used in the molecular machines and the cargo were different, so swarming could be controlled independently of cargo-loading.

Cargo unloading from the group of transporters under UV irradiation. Scale bar: 20 µm. Here, dissociation of the swarm transporter into single microtubules and cargo unloading from the transporters were observed to occur simultaneously. The unloaded cargoes remained stationary and were no longer transported under UV light irradiation. The movie is played at 100 times the speed of the original. Credit: Mousumi Akter, et al. Science Robotics. April 20, 2022

Single machines are able to load and transport polystyrene beads up to 3 micrometers in diameter, whereas swarms of machines could transport cargo as large as 30 micrometers in diameter. Furthermore, a comparison of transport distance and transport volume showed that the swarms were up to five times more efficient at transport compared to the single machines.

By demonstrating that molecular machines can be designed to swarm and cooperate to transport cargo with , this study has laid the groundwork for the application of microrobots to various fields. "In the near future, we expect to see microrobot swarms used in , contaminant collection, molecular power generation devices, and micro-detection devices," says Akira Kakugo.

Explore further

Scientists working to make molecule-sized robots swarm together to perform tasks

More information: M. Akter et al, Cooperative cargo transportation by a swarm of molecular machines, Science Robotics (2022). DOI: 10.1126/scirobotics.abm0677.
Journal information: Science Robotics

Citation: Molecular robots that work cooperatively in swarms (2022, April 20) retrieved 19 May 2022 from
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Feedback to editors