Lowering the costs of using solar-powered electricity when it's not sunny

Lowering the costs of using solar-powered electricity when it’s not sunny
Kenneth Sandhage, a Purdue professor of materials engineering, is researching ways to reduce the costs of generating renewable electricity from the sun’s heat. Credit: Purdue University photo/Rebecca McElhoe

Solar power accounts for about 2% of U.S. electricity, but it could become more widespread if it were cheaper to generate this electricity and make it readily available on cloudy days and at nighttime.

To lower those costs, Purdue University engineers are developing ways to improve how facilities called concentrated solar power produce electricity. These plants provide power at off-peak times by storing captured from sunlight that is focused by thousands of mirrors onto a small area.

Developments in this research are important steps for putting -to-electricity generation in direct cost competition with fossil fuels, which generate more than 60% of electricity in the U.S.

Solar panel systems installed on farms and on rooftops are commonly used to generate electricity from the sun and already store energy for later use using batteries, but concentrated solar power plants can offer large-scale energy storage at a lower cost.

"Since storing solar energy as heat is already cheaper than storing energy via batteries, the next step is reducing the cost of generating electricity from the sun's heat," said Kenneth Sandhage, Purdue's Reilly Professor of Materials Engineering.

There are only 11 concentrated solar power plants in the U.S., but the cost of producing electricity using these plants has dropped by more than 50% since 2010. Purdue researchers are working to reduce concentrated solar power costs even further to compete with fossil fuels.

Seeking solutions from seawater

To make it cheaper for concentrated solar power plants to produce electricity, the turbines of these plants need to operate at much higher temperatures. Turbines currently operate at a peak of about 1,022 degrees Fahrenheit.

By operating the turbines at 1,382 degrees Fahrenheit or higher, a concentrated solar power plant could convert heat energy to electricity more efficiently. This also calls for enabling low-cost storage of solar heat at higher temperatures so that the plants can produce electricity 24 hours a day and respond quickly to surges in electrical demand.

Concentrated solar power plants can store energy from the sun by heating , but currently used molten nitrate salts would degrade at 1,382 degrees Fahrenheit. Sandhage and other researchers in the field have been turning to seawater for chloride-based salts that can stay stable enough at higher temperatures.

But seawater-derived molten chlorides, such as magnesium chloride-potassium chloride-bearing salts that researchers have examined so far, degrade by oxidation in ambient air at 1,382 degrees Fahrenheit.

Lowering the costs of using solar-powered electricity when it’s not sunny
By improving the molten salt used for low-cost heat storage at higher temperatures, researchers can help concentrated solar power plants to generate electricity more efficiently and cheaply. Credit: Purdue University photo/Rebecca McElhoe

In a study published in Materials Today, Sandhage's research group predicted and demonstrated that a different sea-water-derived molten salt, a calcium chloride-sodium chloride composition, is highly resistant to oxidation in ambient air at 1,382 degrees Fahrenheit.

Sandhage's research group also developed a way to make nickel corrosion-resistant so that it can better contain a molten salt such as the calcium chloride-sodium chloride composition.

"We have identified and demonstrated a salt that is stable and plentiful, and we have a containment strategy for holding the salt for extended times to store the energy for use when the sun isn't shining," Sandhage said.

Turning up the heat, one step at a time

To keep lowering the costs of generating electricity from concentrated solar plants, other steps in the electricity generation process also need to handle higher temperatures.

One of those steps is the transfer of heat from a molten salt to a high-pressure working fluid through devices called heat exchangers. Upon heating, the working fluid expands and spins the turbine for generating electricity.

Compact, cost-effective heat exchangers are typically made of stainless steel alloys that would become too soft for use at 1,382 degrees Fahrenheit with a high-pressure working fluid.

In 2018, Sandhage and his collaborators published a paper in Nature revealing how heat exchangers made of a ceramic-metal composite material would be capable of withstanding the higher temperatures and pressures needed for generating electricity more efficiently. Purdue researchers invented this composite-based heat exchanger using materials that had been successfully tested at over 4,000 degrees Fahrenheit in solid-fuel rocket nozzles.

Molten salt and that can handle the heat are just two pieces of the puzzle. Other researchers in the field, for example, are making improvements to receivers—metal tubing carrying the molten salt to be heated by sunlight—and the mirrors that concentrate sunlight.

"If you want to run the whole system hotter, you can't have a weak link anywhere in the chain," Sandhage said.

And in some respects, temperatures need to be lower. Despite the advantages of the calcium chloride-sodium chloride composition, this salt melts at higher temperatures than currently used molten nitrate salts. Sandhage's research group is working on tweaking the molten chloride composition to melt at lower temperatures while still remaining stable at high temperatures.

"Ultimately, continued developments will allow for large-scale penetration of renewable solar energy into the electricity grid," Sandhage said. "This would mean dramatic reductions in man-made carbon dioxide emissions from production."


Explore further

Project to enhance the efficiency of concentrated solar power technology

More information: Adam S. Caldwell et al. Air-stable, earth-abundant molten chlorides and corrosion-resistant containment for chemically-robust, high-temperature thermal energy storage for concentrated solar power, Materials Today (2021). DOI: 10.1016/j.mattod.2021.02.015
Journal information: Materials Today , Nature

Provided by Purdue University
Citation: Lowering the costs of using solar-powered electricity when it's not sunny (2021, April 29) retrieved 18 June 2021 from https://techxplore.com/news/2021-04-lowering-solar-powered-electricity-sunny.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
186 shares

Feedback to editors

User comments