This article has been reviewed according to Science X's editorial process and policies. Editors have highlighted the following attributes while ensuring the content's credibility:


peer-reviewed publication

trusted source


A new approach for the 3D printing of hydrogel-based electronics

A new approach for the 3D printing of hydrogel-based electronics
3D printed all-hydrogel ECG electrode. Credit: Hui et al.

Hydrogels are three-dimensional (3D) polymer networks that do not dissolve in water but retain large amounts of liquids. Due to this advantageous property, hydrogels are particularly promising material platforms for both biomedical and environmental applications, as they can survive in bodily fluids or in wet natural environments without dissipating.

Over the past decade, engineers and materials scientists have been developing numerous based on soft hydrogels, including environmental and biomedical sensors, drug delivery devices, and artificial tissue. Despite the huge potential of these -based devices, their widespread implementation has so far been hindered by their high production costs.

A research team led by Dr. Nanjia Zhou at Westlake University and Westlake Institute of Advanced Studies in China have recently introduced a new strategy to enable the 3D printing of soft hydrogel electronics. Their approach, introduced in a paper published in Nature Electronics, could help to lower the production costs of numerous hydrogel-based devices, including strain sensors, inductors, and biological electrodes.

A new approach for the 3D printing of hydrogel-based electronics
Freeform printing of the conductive ink in hydrogel supporting matrix. Credit: Hui et al.

"We choose to study hydrogel production because while most of the current soft electronics are based on flexible elastomers and polymers, undeniably hydrogel is more similar to the and may lead to better tissue integration and less immune responses," Dr. Yue Hui, one of the researchers who carried out the study, told TechXplore. "As suggested by previously studies, we think that hydrogel is a promising candidate for the creation of future health care electronic devices."

The primarily goal of the recent study by Hui and his colleagues was to devise an efficient strategy to fabricate increasingly complex and biomedically useful hydrogel-based electronics. Their proposed approach is based on 3D , specifically utilizing a hydrogel-based supporting matrix and a stretchable silver-hydrogel ink.

"The embedded 3D printing method we developed involves the freeform printing of a conductive hydrogel ink into a hydrogel supporting matrix, and the subsequent curing of the two parts to form a soft and stretchable electronic device," Hui explained. "These are based on the suitable rheological properties of the matrix and the ink, as well as the orthogonal curing mechanism of alginate and polyacrylamide, which are the main components of the hydrogel."

A new approach for the 3D printing of hydrogel-based electronics
Stretchable 3D printed hydrogel electronics. Credit: Hui et al.

The researchers found that combining a conductive filler (i.e., silver flakes) with granular gel particles led to the formation of a segregated structure in the conductive 3D printing ink. This ink exhibited a remarkable electrical conductivity of over 1,400 S/cm.

To demonstrate the feasibility of their proposed strategy, Hui and his colleagues used it to create a series of hydrogel-based electronics, including strain sensors, inductors and biological electrodes. The resulting devices were found to perform exceptionally well, suggesting that this approach could be used to create a range of new hydrogel-based technologies.

"As we demonstrate in our paper, our method can be used to make various hydrogel electronic devices with different functionalities," Hui said. "Particularly, we can directly print exposed electrodes that can communicate with the outside world, and we can incorporate components such as LEDs and chips into the circuitry via printing. Our findings imply that with delicate design we can really make functional hydrogel electronic devices."

A new approach for the 3D printing of hydrogel-based electronics
LED lit up wirelessly by a 3D printed hydrogel inductor. Credit: Hui et al.

In the future, the recent work by this team of researchers could enable the fabrication of more complex and sophisticated hydrogel-based electronics, including biomedical devices and new technologies to monitor the environment. Hui and his colleagues are now working to improve their 3D strategy to further facilitate its real-world and large-scale implementation.

"We will now keep optimizing the materials and methods," Hui added. "For example, a systematic and theoretical study regarding the conductive ink with segregated structure is still lacking, which may be the key to further improve its conductivity. We also plan to design and fabricate biomedical devices and validate their functionalities in animals."

More information: Yue Hui et al, Three-dimensional printing of soft hydrogel electronics, Nature Electronics (2022). DOI: 10.1038/s41928-022-00887-8

Journal information: Nature Electronics

© 2023 Science X Network

Citation: A new approach for the 3D printing of hydrogel-based electronics (2023, January 10) retrieved 23 July 2024 from
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Scientists design new inks for 3D-printable wearable bioelectronics


Feedback to editors