This article has been reviewed according to Science X's editorial process and policies. Editors have highlighted the following attributes while ensuring the content's credibility:

fact-checked

preprint

trusted source

proofread

Vine-inspired robot can turn toward a heat source

Vine-inspired robot can turn toward a heat source
Model verification on a section of robot. The predicted shape is drawn in orange. Inset shows the infrared image of a similar test setup. Credit: arXiv (2023). DOI: 10.48550/arxiv.2301.07362

A group of robot engineers at the University of California Santa Barbara has designed and built a robot that mimics the way roots and vines move toward moisture sources. They describe their approach and robot prototype in a paper uploaded to the arXiv preprint server.

As continues to mature, scientists and engineers around the world seek new sources of inspiration. In this new effort, the researchers looked at the way plants send roots to moisture sources and vines spread across the environment. The result is a that is capable of turning as it expands toward a heat source.

The robot is approximately 2 meters long and was built using thin, flexible bags filled with Novec 7000—a type of refrigerant. The bags, which were shaped like a sleeve, were then divided into 4.5-cm segments. As the robot bends to move toward a heat source, the segments adjust to accommodate the move. The side closest to the heat source grows shorter, while the side opposite stretches and becomes longer. The robot is incited to move by when its refrigerant begins evaporating at 34°C. In action, it resembles a segmented worm.

The engineers tested their robot by placing it in and watching how well it performed. They found it capable, for example, of navigating around small objects. They also found that it could bend toward a source even if bent backward away from it. They also noted that the robot has eversion capabilities, in which robots extend or unfurl themselves. In the case of the new prototype, the robot was able to pull itself inward, resembling pulling a shirt sleeve inside-out.

The researchers suggest their robot might prove useful for snuffing out a . By arming it with hoses able to pump water or other material, the robot could move to the source of a fire, for example, where dousing material could be deployed. The group concludes by noting that their robot was inexpensive to build, which means it could be an inexpensive tool for use by firefighters. They plan to continue improving their robot, looking to make it move faster and to initiate at different temperatures.

More information: Shivani Deglurkar et al, Thermotropic Vine-inspired Robots, arXiv (2023). DOI: 10.48550/arxiv.2301.07362

Journal information: arXiv

© 2023 Science X Network

Citation: Vine-inspired robot can turn toward a heat source (2023, February 2) retrieved 20 February 2024 from https://techxplore.com/news/2023-02-vine-inspired-robot-source.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Quadruped robot with magnetized feet can climb on metal buildings and structures (video)

97 shares

Feedback to editors